HOW-TO GUIDES

How to Install Trex Colour-Matched Composite Deck Screws

SHARE

Welcome to the ultimate guide on installing Trex Colour-Matched Composite Deck Screws! These screws are specially designed to seamlessly integrate with all Trex decking lines, ensuring a flawless finish for your outdoor oasis. In this step-by-step guide, we'll walk you through the positioning, features, benefits, and installation process of these innovative screws, helping you achieve a stunning deck that stands the test of time.

Disclaimer: Instructions provided by Trex® are based on the build specifications that Trex® demonstrated in the Trex® Academy video series and are not universal to all homeowners’ projects. A homeowner’s build may vary from Trex’s instructions based on the homeowner’s local municipality requirements, individual design preference and project specifications. For questions or assistance needed during your project, please reach out to howto@trex.com. 

10 seconds per fastener
*Times may vary
Print Instructions
Jump To:
Tools
Step-by-Step Instructions
Chapter 01: About the Trex Color-match Composite Deck Screws
Print Instructions

Features and Benefits

  • Machine-Cut Slot: The machine-cut slot effortlessly pierces through the high-performance Trex shell, facilitating a smooth installation process.
  • Lower Threads and HEXSTIX: Unique tri-lobe lower thread design paired with patented HEXSTIX drive technology ensures a fast and wobble-free drive, enhancing efficiency and precision.
  • Mushrooming Elimination: Reverse threads and a unique head design prevent mushrooming around the screw head, resulting in a clean and polished finish.
  • Flawless Colour-Match: An epoxy-coated head flawlessly matches all Trex shell colours, providing exceptional resistance to colour-fade and corrosion.
  • Warranty: Enjoy the same warranty length as the deck board when using Trex Transcend, Select, and Enhance lines of decking, offering peace of mind and durability.

Packs & Contents

Trex colour-matched composite deck screws are available in three convenient pack sizes (75 ct., 350 ct., and 1,400 ct.), each including patented HEXSTIX drive bits. This ensures you have everything you need to complete your project efficiently.

Note: These screws are not recommended for use in salt environments or with sleeper systems less than 2 inches thick.

Step 1: Plan out Fastener Placement

Use two screws per joist or stair stringer to ensure optimal stability for your deck.

Step 2: Drive the Screw

Drive screws at a 90-degree angle to the face of the board to achieve a secure fit with a drill or impact driver. 

Pro Tip

Before installing screws closer than 1 inch from an end or edge, pre-drill the deck board using a 1/8 inches drill bit for precision placement.

Step 3: Make it flush

Countersink the screw head until it is flush with the surface of the deck board to achieve a polished aesthetic.

Tools

Drill

Impact Driver

Learn More

Copyright © 2024 Trex Company, Inc. All rights reserved.

Photos and videos © 2024 Warner Bros. Discovery, Inc. or its subsidiaries and affiliates. All trademarks are the property of their respective owners. All rights reserved.

Icon Image Icon Image Icon Image Icon Image Icon Image Icon Image

Are you in the USA or Canada?

By choosing YES or NO, you acknowledge that you have read Trex's Privacy Policy

Unable to Add to Cart

You may order up to 4 free samples. To adjust your selections, remove what you do not need and then add your new choices.